CASE STUDY

16789: PROJECT FEEDING ANCHOR NUTS INTO TAPPING MACHINE

Feedall Model
Model 2400-D Elevating Hopper Feeder

APPLICATION

Feed from a random loaded, floor mounted hopper. The Anchor Nuts will be elevated out of the hopper and discharged in a continuous end-to-end stream flat, with rounded side up. The parts will then be transferred one at a time for customer pick up.

WIDTH

7-1/2” Wide Table-Top Chain

DRIVE

1/2 HP/AC Motor

PARTS FED (SIZE)

Anchor Nuts (.764” thick by 1.306” wide by 2.300” long)

FEED RATE

30 Parts/Minute